How to Care for Your Bathroom Fittings – Maintenance Guide for Pakistan

May 29, 2026

Your bathroom fittings are one of the most-used items in your home — touched dozens of times every day. With the right care, Faisal Sanitary fittings will look and perform like new for many years. Here is our practical maintenance guide tailored for Pakistan's water conditions.

Daily Care — 2 Minutes a Day

The single most impactful habit is the simplest: wipe your fittings dry after every use. Water — especially hard water common in Lahore, Multan, Faisalabad, and most of Punjab — leaves mineral deposits when it dries. A quick wipe with a soft cloth after use prevents 90% of all fitting maintenance issues.

Weekly Cleaning by Finish Type

Chrome Fittings

Wipe with a soft damp cloth — mild dish soap is fine
For mineral deposits: white vinegar on a cloth, leave 5 minutes, wipe off
Never use abrasive cleaners, steel wool, or harsh chemicals
Dry thoroughly after cleaning

Youthful Colour (Powder Coating)

Wipe with a soft damp cloth and mild soap only
Do not use vinegar or acidic cleaners — these can damage the powder coat
Avoid abrasive sponges

Chrome Gold Fittings

Wipe gently with a soft damp cloth
Use a gold-specific cleaner occasionally for shine
Avoid acidic or abrasive cleaners on the gold accents
The chrome parts can be cleaned as standard chrome

Matt Black (PVD) Fittings

Wipe with a microfibre cloth — lint-free
Mild soap and water only
Matt black shows water spots and fingerprints more than chrome — wipe daily
Never use vinegar or bleach-based cleaners on PVD finishes

PVD Full Gold Fittings

Wipe gently with a soft cloth after every use
Use a specialised PVD cleaner for periodic deep cleaning
No acidic, bleach, or abrasive cleaners under any circumstances

Monthly Maintenance

Check for drips — a dripping tap usually means the cartridge washer needs replacement. Faisal Sanitary cartridges are widely available. A plumber can replace in 15–20 minutes.
Check tee stop cocks — open and close each one to prevent seizing. They should turn smoothly.
Clean shower head — soak in vinegar solution overnight to clear mineral build-up in the nozzles.
Check flexible pipes — look for any bulging, cracking, or leaks at the connections.

Annual Check

Have a plumber inspect all connection points and wastes for any slow leaks
Check tile grout around the bath area for any cracks — reseal immediately to prevent water ingress behind tiles
Consider applying a protective coating spray on chrome fittings to repel water and reduce scale

Dealing with Pakistan's Water Issues

Hard Water (Punjab — Lahore, Multan, Faisalabad): Use a water softener filter at the main supply point if possible. This dramatically reduces scale build-up on all fittings and extends cartridge life.

Variable Pressure (most cities): Install a pressure regulator if your water pressure exceeds 4 bar — high pressure accelerates cartridge wear.

Chlorinated Water: Higher chlorine content (common in urban supplies) can affect rubber seals over time. Annual cartridge inspection is recommended.

When to Replace Cartridges

Faisal Sanitary uses imported ceramic cartridges in all single lever fittings. These typically last 5–10 years with proper care. Signs that a cartridge needs replacement:

Dripping that cannot be stopped by tightening the handle
Stiff or jerky lever movement
Hot and cold mixing improperly

Cartridges are available through Faisal Sanitary dealers. Contact us on WhatsApp and we will help you find the right cartridge for your fitting.

Back to blog